Canopy Tent Feather Flags

If you have an MVP Visuals canopy tent, yes. Pick the 40mm Hex frame for standard sizes (5x5 through 10x20). Pick the 50mm Hex frame for the heavier corner posts on 13x13 and 20x20 tents. If you have a non-MVP tent, the included leg holders are designed for hex-shaped corner posts of these specific dimensions. Contact us with your tent brand and frame model before ordering to verify compatibility.

The number refers to the diameter of the hex pole the holder grips. MVP's standard tents (5x5 through 10x20) use 40mm hex corner posts, while the larger 13x13 and 20x20 tents use thicker 50mm hex posts to support the bigger canopy structure. The frame size is purely about leg compatibility. The flags themselves and the visual impact are identical between the two options. The 50mm version is $31 more because of the heavier-duty mounting hardware.

One order = one matched pair (2 flags). The product is sold in pairs because flags are typically mounted symmetrically on two corners of the tent. To get 4 flags (one for each corner), order quantity 2 in your cart. That's 2 pairs = 4 flags total. Quantity discounts apply for multi-pair orders.

Aesthetic match more than functional difference. All five shapes have similar visibility and motion characteristics. Straight is the default for corporate, clean aesthetics. Concave and Angled both read modern, while Convex carries bold athletic energy. Teardrop fits traditional and warm brand tones. Send us your logo and brand guidelines during the proof process if you want a recommendation. Same price across all shapes; the choice is purely visual.

Yes, somewhat. The feather flag's visual impact comes from motion. The way the flag waves and ripples in wind catches the eye in a way static banners can't. In completely windless conditions (indoor venues, fully enclosed convention centers, very still days), the flag will hang straight down and read as a static narrow vertical banner. Still visible, still branded, but without the motion-driven attention that's the product's main USP. Outdoor events, even with light breeze, are the ideal use case. For guaranteed-windless venues, billboard banners or wall graphics may be a better visibility choice.

Single-sided prints graphics on the outside face only, which is fine when your flag is positioned along a venue perimeter where one direction faces the crowd. Double-sided prints both faces, worth the $10 upcharge (on standard 40mm frames) for trade show booth aisles where people walk past on both sides, sports sidelines with crowds on both sides, festival activations where the inside face is also visible, and any setup where the flag's reverse face is part of customer sight lines. For most outdoor event use cases, double-sided is a low-risk upgrade.

Each flag attaches to a tent leg via a hex-shaped leg holder (40mm or 50mm depending on tent). The pole slides into the holder, the flag attaches to the pole. Tool-free installation. Setup takes about 2-3 minutes per flag once your tent is fully assembled. The leg holders stay attached to the tent legs between events. Only the poles and flags need to be packed for transport.

Including the pole and mounting structure, feather flags rise approximately 12-14 feet above the ground when mounted on a standard 10ft canopy tent. That's roughly 2-4 feet above the canopy peak. Higher than billboard banners (which sit about 2 feet above the peak), and noticeably higher than walls or corner banners. The exact height depends on your tent's leg setting and the included pole length.

Designed for typical outdoor event conditions. The 110g knitted polyester is wind-rated for moderate wind, and the leg holders provide secure mounting. The flags are MEANT to flex and wave in wind. That's the design intent. For sustained high winds or storm conditions, dismount the flags the way you'd dismount any flag. The mounting hardware is tool-free for exactly this reason. Between events, the leg holders can stay attached to the tent itself. Pack only the poles and flags.

Yes. Feather flags use the same dye-sublimation print process and Pantone color matching as our canopy tops, walls, and other branded MVP items. Send your Pantone codes and we match them on physical swatches before printing. Your flags read consistent with the rest of your branded kit. Note: the 110g knitted polyester fabric is lighter than the 600D canopy material, which can produce slight color depth differences. The match is close, not identical. That's typical for flag-fabric printing across the industry.

Yes. Once we have your artwork, we send a digital proof that shows exactly how your design will appear on the flag, including the chosen flag shape and any cropping/scaling considerations specific to vertical flag layouts. Approve or request changes. Nothing runs until you sign off.

Production takes 1 business day after artwork approval. Delivery runs 4-6 business days. Need it sooner for a tournament, festival, or event deadline? Reach out before ordering and we'll tell you what's realistic.